Autoclave basket unloader

The system is designed to unload filled containers from the autoclave basket and consists of a hydraulic scissor-type lift, a storage conveyor and an unloading device. All main parts of the loader are made of stainless steel AISI 304.

Overall dimensions, mm: w/d/h – 1274/5190/1655

The operator brings the basket, installed and fixed on the transport trolley, and places it on the rails of the lift and fixes it in the frame cavity with a latch. The operator uses a joystick to lift the movable bottom with a perforated gasket to the required height and controls the shift bar with another joystick, while the next layer of cans moves from the basket to the accumulation conveyor. The cans end up on the accumulation conveyor of the unloading line, which has the width of the autoclave basket. Then the operator removes the perforated gasket (separator) in the basket and repeats all operations again until the last layer in the basket is unloaded.

Completeness:

– inverter, gearbox, electric motor – Bonfiglioli ABB (Italy)

– hydraulic cylinder Bosch Rexroth

– polyethylene conveyor belt (manufactured by Habasit, Italy) with a minimum coefficient of friction.