Autoclave horizontal

Autoclave horizontal automatic shower V2.43-2. ​​We supply industrial horizontal autoclaves of all types and configurations: Autoclave horizontal “Water-spray”, Autoclave shower, Autoclave horizontal steam, Steam rotary autoclave, Full-water autoclave, Full-water rotary autoclave, Autoclave horizontal universal.

All electronics and control units are made in Japan or the EU. All autoclaves are made of high-quality stainless steel. Warranty – 12 months. We deliver, supervise installation and commissioning anywhere in the CIS. Prices for autoclaves are much lower than European analogues. At the request of customers, we provide a list of companies where the horizontal autoclave is successfully used. It is possible to supply absolutely any configuration of a horizontal autoclave, for any number of baskets, useful volume, etc.

The delivery set of the equipment “Horizontal automatic shower autoclave” for 2 baskets includes:

autoclave V2.43-2 – 1 pc.

basket – 4 pcs.

gasket – 40 pcs.

trolley – 4 pcs.

Technical characteristics of the autoclave V2.43-2:

Inner diameter/length – 1200/1800mm

Capacity – 2.43m³

Design pressure – 0.35 Mpa/50.8Psi

Working pressure – 0.30 Mpa/43.5Psi

Design temperature – 145^°C  

Operating temperature – 121^°C 

Installed capacity of the autoclave –4 kW

Voltage – 380V 3phase 50Hz

Body material – stainless steel Sus304

Case thickness – 5 mm

Thickness of the thermal protective layer – 5 cm

Thermal protection layer material –mineral wool

Square – 3550*2000*2150mm

Weight (empty/loaded) – 1500/2000 kg

Tray size (stainless steel Sus304) – 900*800*800 mm

Number of baskets (stainless steel Sus304) – 2

Number of gaskets (stainless steel Sus304) – 20

Water quality requirements – water cooling: chloride ion content should not exceed 25 mg/l. Water treatment: water hardness ≈ 0.03 moll/L

Water tank (cooling) – 5м³

Cooling pump – Water flow: 22.3 m3/hour. Tray height – 16 m

Steam boiler – 0.7t/hour¸ 0.7 mpa

CONSUMPTION for 1 autoclave (at a temperature of 121°C, sterilization – 20 min., cooling – 20 min.):

Electricity – 2 kW/hour

Steam – 130 kg

Water for sterilization – 260l (cycle)

Cooling water – 3900l (cycle).

All electronics are made in Japan and the EU.

Warranty – 12 months.

Industrial autoclave

An autoclave is a sealed container that is mounted on a frame and includes a lid, a pipeline system, and shutoff valves. Industrial equipment is indispensable for canning shops and factories that work in large volumes. With the help of the equipment, it is possible to screw on many cans at once without any particular difficulties.

Main types

An autoclave is used to sterilize products. But the operating principle may differ slightly, depending on the specific type. Based on the main characteristics of heat exchangers, the equipment is divided into 3 types:

Internal – mounted in the middle of the equipment.

External – placed on top of the autoclave from the outside.

Remote – installed outside the equipment.

The mixing mechanisms operate using pneumatic, mechanical or electrical energy.

According to the location of the equipment, it can be:

Horizontal autoclave – includes 2 hatches on the sides, which allow loading and unloading the product on both sides. The horizontal industrial autoclave takes up quite a lot of space, and its length varies depending on the model.

A vertical autoclave is a more compact piece of equipment, takes up little space and is often powered by electricity. This option is perfect for the food industry.

During operation of any type, it is necessary to monitor the liquid level, temperature conditions and pressure. For this purpose, the equipment is equipped with special devices that simplify production. The cost depends on the capacity of industrial autoclaves. You can find out the details by contacting OOO TEKHPRODSERVIS or via the feedback form.

Benefits of using

The principle of operation of the autoclave helps to produce various preservations:

Canned meat.

Fish.

Vegetables.

Jams.

Compotes.

Pates.

The main advantages of the equipment:

Preparing preserves in their own juice.

The finished product retains the maximum amount of nutrients.

The ability to create dietary mixtures and for children.

Vacuuming increases juiciness.

The preparation requires a minimum amount of oil, sugar and other additives.

The sterilization period is significantly reduced compared to standard methods.

Autoclaves from OOO “TEKHPRODSERVIS” are made from high-quality materials using modern technologies, observing all technical rules and regulations. Each device is safe, hermetic and high-quality, and its cost is significantly lower than imported analogues. Since we manufacture the equipment ourselves, payment is made for the product itself, without intermediaries.

We have a flexible pricing policy, free turnkey setup upon purchase, training, warranty and post-warranty service. To select and order, please fill out the feedback form, call by mobile phone or send a letter via e-mail.

You can order reliable equipment for the production of canned meat through our website, by e-mail or by phone.